Search results

Feeding portal STORETEQ H-700

different lengths. The portal takes the raw material directly from the material stack and stores it in the upright position. From here, the required wood is automatically transported to the carpentry machine

Feeding portal STORETEQ H-100

frameworks The STORETEQ H-100 offers you a fully automatic solution for all the material logistics required to manufacture your frameworks. The feeding portal removes the studs from the material storage location [...] station via and additional collection point. From there, the studs are fed via roller conveyors directly to the framework station.

Where skilled workers are forged

CENTATEQ works with 18 spindles, 12 of them in the vertical direction, four horizontally in the X direction and two horizontally in the Y direction. A groove saw with a diameter of 125 mm can also be used [...] so WIFI wanted to take several steps forward with the new processing center. A whole range of requirements were therefore also on the agenda. In Linz, the machine pool of the wood technology department [...] CENTATEQ was based on the general training structure at WIFI, while on the other hand, the special requirements of the wood technology department had to be met. The key points were flexibility and a wide range

Keynote productionManager

come about? Which requirements from the carpentry trade does the "digital job folder" cover? Development support - directly from the joinery: At the same time, you will hear direct feedback from the field

Automated robot cell: HOMAG DRILLTEQ V-310 with FEEDBOT D-310

an online shop with an integrated furniture planner. The furniture designed there is transferred directly to a processing center. Conscious decision in favor of an automated robot cell. This processing [...] Raumwunder was therefore able to score points with its maximum carcase processing yet minimum space requirements. Carcasses for joineries. The business uses the machine primarily for processing carcasses and [...] the cell are particularly evident in the good process integration of the robot: it can be operated directly via the processing center without its own control system and programming. The practical result:

Industrial manufacturing for personal bathroom furniture

a number of ceramic series. In general, the furniture is manufactured according to customers’ requirements. With 46 different surfaces made of decor, veneer or varnish, there is a particularly wide variety [...] associated cutting patterns on the SAWTEQ B-320 flexTec, the parts that do not need to be edged run directly to stacking. Components that are to receive an edge are buffered in a SORTEQ H-600 layer storage [...] storage, which acts as a decoupling buffer, and arefed to an EDGETEQ S-800 edge processing machine as required via intermediate transport. Designed for commissioned production, the machine works independently

Production line for batch size 1 kitchens

meaning less air is required and the heating effect on the surrounding area is reduced. With regard to the EDGETEQ S-500, which Breitschopf had specially adapted to the requirements of their Steyr-Dietach [...] "For example, the V-500 and H-600 drilling programs also run directly on the machines with no problems," says the production manager. Directly to the customer… For the components that have been trimmed, [...] quality of its kitchens that it also provides a ten-year warranty. And because its kitchens come directly from the manufacturer without any detours, the quality and bespoke design can be offered at an

SieMatic relies on cardboard-box cutting machine VKS 250

cutting machine meets all requirements. It fits smoothly into the existing process chain and is integrated into the production control system. Existing product data are directly sent to the machine by scanning [...] kitchens of highest quality are produced per day at the location East Westphalia. The same quality is required in the packaging and logistics chain. Pre-assembled standard packaging is no optimal solution for

toleranceCheck: Consistently produce dimensionally and angularly accurate parts

exactly where toleranceCheck can help! At the heart of the technology is a sensor system that is directly on the angle ruler of the panel dividing saw, which helps the machine operator to detect curvatures [...] curvatures even before cross-cutting, and to see whether individual parts will be inside or outside the required dimensional tolerance. Operators now have the opportunity to react actively and can decide for or [...] toleranceCheck also detects insertion errors. The advantages at a glance: Ensures the individually required dimensional and angular accuracy of parts - especially in the case of stressed material Creates

CNC processing: New entry-level solution, robot support in woodworking shops and tool-free furniture

in via two stacks and positioned directly on the filled bottom part and initially sealed on the front side. This means that only a small installation space is required and there is no downtime during stack [...] single-point principle and, depending on requirements, can be converted fully automatically within a short time. Grooves and cuts can be executed in the running direction of the corrugated cardboard fed in, [...] transferred directly to the PAQTEQ C-250 control system. The cutting programs also have significant performance specifications and are visualized in 2D and 3D both in the shop and directly on the machine